2 Primary Regulators into 1 w/seconday?

[derfburg]

How can I turn a primary into a seconday?

[Phil]

wot

[straight cash homey]

+wot

[Otter]

I've had the same issue. You have to order a left handed thread to right handed thread nipple. I found one online, but can't remember where. It works fine. I put a primary inline with a couple secondaries for a 4 regulator setup.

[Phil]

I've had the same issue. You have to order a left handed thread to right handed thread nipple. I found one online, but can't remember where. It works fine. I put a primary inline with a couple secondaries for a 4 regulator setup.

mcmaster.com sells everything, generally

[Otter]

Mcmaster doesn't have that particular fitting.

Found the site. http://beverageequipmentco.com/BEC_Co2_regulators__parts.htm

The part number is 55496-4. That should allow you to connect a primary to a row of secondary regs.

[derfburg]

Mcmaster doesn't have that particular fitting.

Found the site. http://beverageequipmentco.com/BEC_Co2_regulators__parts.htm

The part number is 55496-4. That should allow you to connect a primary to a row of secondary regs.

Awsome, thank you for the help.