Beer Forum

Posted: **Tue Aug 11, 2009 11:25 am**

How can I turn a primary into a seconday?

Posted: **Tue Aug 11, 2009 12:09 pm**

Posted: **Tue Aug 11, 2009 12:19 pm**

Posted: **Tue Aug 11, 2009 12:39 pm**

I've had the same issue. You have to order a left handed thread to right handed thread nipple. I found one online, but can't remember where. It works fine. I put a primary inline with a couple secondaries for a 4 regulator setup.

Posted: **Wed Aug 12, 2009 6:06 am**

Otter wrote:I've had the same issue. You have to order a left handed thread to right handed thread nipple. I found one online, but can't remember where. It works fine. I put a primary inline with a couple secondaries for a 4 regulator setup.

mcmaster.com sells everything, generally

Posted: **Wed Aug 12, 2009 9:59 am**

Mcmaster doesn't have that particular fitting.

Found the site. http://beverageequipmentco.com/BEC_Co2_regulators__parts.htm

The part number is 55496-4. That should allow you to connect a primary to a row of secondary regs.

Posted: **Wed Aug 12, 2009 10:53 am**

Otter wrote:Mcmaster doesn't have that particular fitting.

Found the site. http://beverageequipmentco.com/BEC_Co2_regulators__parts.htm

The part number is 55496-4. That should allow you to connect a primary to a row of secondary regs.

Awsome, thank you for the help.

Beer Forum

2 Primary Regulators into 1 w/seconday?

2 Primary Regulators into 1 w/seconday?

Re: 2 Primary Regulators into 1 w/seconday?

Re: 2 Primary Regulators into 1 w/seconday?

Re: 2 Primary Regulators into 1 w/seconday?

Re: 2 Primary Regulators into 1 w/seconday?

Re: 2 Primary Regulators into 1 w/seconday?

Re: 2 Primary Regulators into 1 w/seconday?